search

Case K44 Spécifications Page 55

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 165
  • Table des matières
  • MARQUE LIVRES
    • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 54
User InterfaceGPS and Assisted GPS
41Operating Manual 1171.5248.12 ─ 15
Activates/deactivates spreading. When spreading is deactivated the pure navigation data
is modulated onto the RF carrier.
SCPI command:
[:SOURce<hw>]:BB:GPS:SPReading[:STATe] on page 98
Initial HDOP
(R&S SMx/AMU instruments only)
Displays the HDOP (Horizontal Dilution of Precision) of the selected satellite constellation
at the beginning of the simulation.
The displayed HDOP value is not updated. The dynamic "HDOP" calculated on the cur-
rent satellite constellation is displayed in the Real-Time S.P.O.T. dialog.
The HDOP can be used as an indication of 2D positioning quality. The general rule here
is that the smaller the HDOP the better the precision of the position fix will be.
At least four different satellites have to be configured to get a reasonable value; otherwise
-1 will be displayed.
Note: This parameter is enabled only for "Localization" mode.
SCPI command:
[:SOURce<hw>]:BB:GPS:HDOP on page 85
Initial PDOP
(R&S SMx/AMU instruments only)
Displays the PDOP (Position Dilution of Precision) of the selected satellite constellation
at the beginning of the simulation.
The displayed PDOP value is not updated. The dynamic PDOP calculated on the current
satellite constellation is displayed in the Real-Time S.P.O.T. dialog.
The PDOP can be used as an indication of 3D positioning quality. The general rule hire
is, that the smaller the PDOP the better the precision of the position fix will be.
At least four different satellites need to be configured to get a reasonable value; otherwise
-1 will be displayed.
Note: This parameter is enabled only for Localization mode.
SCPI command:
[:SOURce<hw>]:BB:GPS:PDOP on page 92
State
Activates/deactivates the generation of the satellite signal.
SCPI command:
[:SOURce<hw>]:BB:GPS:SATellite<st>:STATe on page 97
Ranging Code
Selects the type of ranging code.
Note: Selecting the ranging code is only enabled for "Generic" simulation mode; for
"Localization" mode this parameter is read-only.
Satellite Configuration
Vue de la page 54
1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 164 165

Commentaires sur ces manuels

Pas de commentaire
Produits connexes et manuels pour Tondeuses à gazon Case K44
Tondeuses à gazon Case H44 Manuel de l'opérateur   (12 pages)
Tondeuses à gazon Case K44 Manuel d'instructions   (30 pages)
Tondeuses à gazon Case K44 Manuel de l'opérateur   (20 pages)
Tondeuses à gazon Case J44 Manuel de l'opérateur   (19 pages)
Tondeuses à gazon Case H46 Manuel d'utilisateur   (8 pages)
Tondeuses à gazon Case H40 Manuel d'utilisateur   (7 pages)
Tondeuses à gazon Case J44 Manuel de l'opérateur    (15 pages)
  • Terk Fracarro Allied Vision Technologies Pureit Horizon Fitness
  • Franklin Jouets d'apprentissage Impulse Non Sansui TV LCD Electrolux Accessoires de cuisine et de ménage Carrier Générateurs d'électricité
  • Peavey PV 215 EQ Sharp EL-1607P Milwaukee angle grinder Sony DSC-HX100V LG HB965DF
  • Makita UH200D Manuel d'instructions BrightSign HD2000 Spécifications Epiphan Lecture Recorder x2 Spécifications Zanussi ZOB31301XK Manuel de l'utilisateur Dale Tiffany TB10098 Manuel d'instructions