Remote-Control CommandsGPS and Assisted GPS
99Operating Manual 1171.5248.12 ─ 15
Note: This parameter is enabled only for "Localization" Mode.
Suffix:
<st>
.
1 .. 8
Return values:
<Duration> float
Example:
BB:GPS:SMOD LOC
satellite signals are generated corresponding to a 'real' location.
BB:GPS:SVID2:DUR?
queries the time the satellite's elevation will be higher then
2.5/5/7.5/10°.
Usage: Query only
[:SOURce<hw>]:BB:GPS:SVID<st>:POWer <Power>
(R&S SMx/AMU instruments only)
Sets the power offset of the satellite.
The offset determines the power ratio of the activated satellites.
After "Adjust Total Power to 0dB" has been performed, the resulting level of a certain
satellite is calculated according to the following:
Resulting Level = Global Level + Satellite Power + Additional Power
Suffix:
<st>
.
1 .. 8
Parameters:
<Power> float
Range: -50.0dB to +10.0dB
Increment: 0.1dB
*RST: 0dB
Example:
BB:GPS:SAT4:POW -2 dB
sets a power offset of 2 dB.
[:SOURce<hw>]:BB:GPS:SVID<st>:TSCHips <Tschips>
(R&S SMx/AMU instruments only)
Sets a delay of the selected satellite relative to the other satellites. The time shift is set
in oversampled CA chips (Oversamling = 40).
Suffix:
<st>
.
1 .. 8
Satellites Configuration and Satellites Signal Settings
Commentaires sur ces manuels